Sterlco GP Series 20-60 HP Packaged Chillers - Manual (Page 48)

GP Series Portable Chillers Chapter 4: Operation 48 of 93
Enter the Operator Password by depressing the to move the position of
the cursor, and then depressing the or button to increment or
decrement the number. Once all of the numbers have been entered depress
the to accept the password. The following screen will appear.
Figure 18: Operator Setpoints Screen
3. Depress to move the cursor to the Leaving Temp line. Use the or
button to increment or decrement the value. Depress to accept the
value and move the cursor down one line.
4. Adjust the Hi Temp Warning and Hi Temp Fault in the same manner.
5. Depress the button twice to return to the main status screen.