Sterlco SMS Series Single Shaft Shredder - Manual (Page 17)

GRN4-605 Chapter 2: Functional Description 17 of 93
Machine (Standard Execution)
The machine housing, drive motor, gear box, hydraulic system and terminal box are
mounted on the base frame for electrical connections.
2-3 Typical Features and Components
Material In-feed
The material can be fed into the shredder in the following ways:
• Manual in-feed of the material directly into the in-feed hopper.
• Manual in-feed of the material with the help of an additional in-feed device
(e.g. hydraulic feeding unit).
• Automatic in-feed of the grinding material via an additional in-feed device
(i.e. conveyor belt).
In-feed Hopper
3
7
4
2
6
5
1
8
(1) Base Frame
(2) Machine door
(3) Hopper door
(4) Gear Box
(5) Drive motor
(6) V-belt guards
(7) Ram hydraulic guards
(8) Discharge area