Sterlco SMS Series Single Shaft Shredder User Manual
Page 26
GRN4-605
Chapter 2: Functional Description
26 of 93
V-Belts and Ram Guards
V-belt and ram guards are screwed to the machine. They can be dismounted for
installation and maintenance work only when all rotating parts have come to a complete
standstill and the machine is electronically locked out.
NOTE: The operator must fit and mount the protective devices delivered with the
machine according to current legal safety regulations if a machine is delivered
without drive motors per request of the customer.
Safety Markings
Safety markings are attached to the machine. Should one of these markings
becomes detached or is no longer recognizable, it must be replaced. New safety
markings can be ordered through safety signage provides or from the
manufacturer.
Personal Protective Gear
Wear close-fitting clothing. Hair must be pulled back, and loose jewellery is
prohibited.
(1) Ram guarding
(2) V-belt guarding
1
2