Sterlco SMS Series Single Shaft Shredder - Manual (Page 27)

GRN4-605 Chapter 2: Functional Description 27 of 93
The following protective gear must be worn when carrying out the following tasks:
Emergency Stop Button
The machine may only be operated with the installed Emergency Stop buttons.
An Emergency Stop Button must be mounted to the control cabinet and another
on the grinding material in-feed.
Immediately press one of the Emergency Stop buttons in case of an emergency.
The Emergency Stop must be activated in all situations where injury or
damage could result!
Re-operation:
1. Eliminate cause of Emergency Stop.
2. Unlock Emergency Stop button
3. Acknowledge fault.
4. The machine is now ready for operation.
Safety
helmet Safety
boots Safety
gloves Safety
goggles Ear
muffs
Unloading machine. x x x
Connecting machine. x
Operation. x x x x
Cleaning. x x x
Maintenance of bearings. x
Screen replacement. x x
Maintenance of V-belts. x
Maintenance of cutting
cutters. x x
Cutter sharpening. x x x x