TOHO ELECTRONICS TTM-509 - Manual (Page 41)

TOHO TOHO ELECTRONICS INC.
DWG. No.
45-4199-E
PAGE
41/66
4.4.4 Initial setting mode
The code "ch" represents input channels ( to ).
Character
PV screen
Auxiliary screen Designation Description Initial value
1 □
□□□□ Select an initial
setting Setting concerning initial setting
2 □
(□/
□) Select an initial
setting channel
3  ch
 Set an input type Multi-input model
□□□: Thermocouple K
□□□
: Thermocouple J
□□□: Thermocouple T
□□□: Thermocouple E
□□□
: Thermocouple R
□□□: Thermocouple S
□□□: Thermocouple B
□□□
: Thermocouple N
□□□: Thermocouple U
□□□: Thermocouple L
□□□
: Thermocouple WRe5-26
□□□: Thermocouple PR40-20
□□□: Thermocouple PL II
□□□
: Pt100
□□□: Pt100 (Display of the second decimal
place: -120.00 to 120.00)
□□□ : JPt100
□□□: JPt100 (Display of the second decimal
place: -120.00 to 120.00)
□□□ : Pt1000
□□□: Pt1000 (Display of the second decimal
place: -120.00 to 120.00)
□□□ : 0 to 1 VDC
□□□: 0 to 5 VDC
□□□: 1 to 5 VDC
□□□
: 0 to 10 VDC
□□□: 0 to 10 mVDC

For the 2ch side, not only the above inputs but the
following input can be selected as well:
: Potentiometer (selectable on the 2ch side only)
: Pt100, 4-wire type (selectable on the 1ch side
only)
Settable when an option is selected only.
The 2ch side cannot be selected when a 4-wire
type is selected.
