TOHO ELECTRONICS TTM-509 - Manual (Page 56)

TOHO TOHO ELECTRONICS INC.
DWG. No.
45-4199-E
PAGE
56/66
4.4.10 Timer setting mode
Character
PV screen
Auxiliary screen Designation Description Initial value
1 □
□□□□ Select the timer Setting concerning the timer
2 □
 Set a timer
function : Auto-start
: Manual start
: Event start
: SV start (OFF delay only)
Setting a value for the ON delay timer to be mentioned
below will activate it as an ON delay timer.
Setting a repetition frequency activates the timer as a
repetition timer. At that time, repetition will not be
activated unless an ON or OFF delay timer is set. 
3 □
 Set a timer unit : Hours and minutes
: Minutes and seconds 
4 □
 Set a start
tolerance for the
timer SV Thermocouple input
Setting range: 0 to 999 or 0.0 to 999.9
Setting unit:
°C
Resistance bulb input
Setting range: 0 to 999 or 0.0 to 999.9 or 0.00 to
999.99
(when the input type is ,,
or )
Setting unit: °C
Current and voltage inputs
Setting range: 0 to 99999
The decimal place can be set to a
desired position.
Setting unit: digit

CH2 only
Potentiometer input
Setting range: 0.0 to 999.9
Setting unit:
%
* If the timer is used, set a connection channel with P45  or P50 .