Transmille 8000 Series - Manual (Page 31)

8000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Page 30
Settings Menu Descriptions
Menu Item Description of Use
Set reading and key beep modes
on or off
View / Set current date and time
Set decimal separator type (. or,)
and function default
Ranging behaviour
Set up Ethernet interface /
view Ethernet status
Set GPIB address
Enter calibration mode
(enter password) to gain access to
calibration menu
Set new password for calibration
mode or exit calibration mode
Only available if cal mode active
Calibration menu for adjustment of
± full scales, zero or value
dependant on range selected.
Only available if cal mode active