Brother MFC-820CW - Manual (Page 107)

Wireless installation for Windows ®
8 - 36
8
Note
• If you want to set more than one WEP key, click Advanced.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.
16
Enter a new SSID and choose the Authentication
Method and Encryption Mode from the pull-downs
in each setting box. Then enter the Network key
and click Next.
Note
If you do not know the Authentication or Encryption settings for network, contact your network administrator.
17
Click Next. The settings will be sent to your
machine. The settings will remain unchanged if you
click Cancel.
Note
If you want to manually enter the IP address settings of your machine, click Change IP Address and enter
the necessary IP address settings for your network. After making your selection, click Next and the Wizard
will search for available wireless networks.