Brother MFC-820CW - Manual (Page 99)

Wireless installation for Windows ®
8 - 28
8
19
If the machine is configured for your network,
choose the machine from the list, and then click
Next.
Note
This window will not appear if there is only one machine connected on the network as it will be chosen
automatically.
20
If the machine is not yet configured for use on your
network, the following screen appears.
Click OK.
The Configure IP Address windows will appear.
Enter the proper IP address information for your
network by following the on-screen instructions.
21
When the Brother and ScanSoft ® on-line
Registration screen is displayed, make your
selection and follow the on-screen instructions.
22
Click Finish to restart your computer. (For Windows ®
2000 Professional/XP, you must be logged on with
Administrator rights.)