Brother MFC-820CW - Manual (Page 25)

Configuring your machine for a wireless network
3 - 4
3
2
Start to search for a SSID around the machine.
3
After a few seconds, you can select the SSID from the list using ▲ or ▼ . Press Set to select the SSID.
If you select the SSID displayed, go to Step 8.
If you want to add a new SSID, go to Step 4.
4
Select <New SSID> using ▲ or ▼ .
Press Set.
5
Enter a new SSID. For information how to type text, see Entering Text on page B-8.
Press Set.
6
Using ▲ or ▼ , select Infrastructure when instructed.
Press Set.
If you select
Ad-hoc, go to Step 8.
7
Select the Authentication method using ▲ or ▼ , and press Set.
If you select Open System, go to Step 8.
If you select Shared Key, go to Step 9.
If you select WPA-PSK, go to Step 10.
Searching SSID
Select SSID&Set
Brother
Select SSID&Set
<New SSID>
SSID:
_
Mode Select
Ad-hoc Mode Select
Infrastructure
Auth. Select
Open System Auth. Select
Shared Key Auth. Select
WPA-PSK