Brother MFC-820CW - Manual (Page 118)

Wireless installation for Macintosh ®
9 - 8
9
Note
• If you want to set more than one WEP key, click Advanced.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.
18
Click Next. The settings will be sent to your
machine. The settings will remain unchanged if you
click Cancel.
Note
• If you want to manually enter the IP address settings of your machine, click Change IP Address and
enter the necessary IP address settings for your network. After making your selection, click Next and
the Wizard will search for available wireless networks.
• The control panel settings will be automatically changed to WLAN when the wireless settings are sent
to your machine.
19
If you chose to use a network cable in step 9, go to step 20.
If you chose not to use a network cable in step 9, go to step 22.
20
Disconnect the network cable between your access
point (hub or router) and the machine, and click
Next.