Brother MFC-820CW - Manual (Page 128)

Wireless installation for Macintosh ®
9 - 18
9
12
Follow the on-screen instructions to complete the
setup by the control panel. See
Using the Setup
Wizard from the control panel LAN menu for a
wireless network on page 3-3. When finished, go to
the driver installation in
step 20.
13
If more than one wireless machine is available on
the network, the following list appears. If the list is
blank, check that the access point and the machine
are powered on, and then click Refresh. Choose the
machine you wish to configure, and click Next.
Note
The Default Node name of the NC-xxxx (where “xxxx” is your model name) is “BRW_xxxxxx” or
“BRN_xxxxxx” (where “xxxxxx” is the last six digits of Ethernet address).
14
The wizard will search for wireless networks
available from your machine. If more than one
wireless network is available, the following list
appears. Choose the access point you wish to
associate the machine with, and then click Next.