Brother MFC-820CW - Manual (Page 140)

Wireless installation for Macintosh ®
9 - 30
9
Note
• If your target Ad-hoc network does not appear on
the list, you can manually add it by clicking the
Add button. Follow the on-screen instructions for
entering the Name (SSID) and the Channel
number.
• If the list is blank, check if the machine is within
range for wireless communication. Then, click
Refresh.
15
If your network is not configured for Authentication
and Encryption, the following screen will appear. To
continue installation, click OK and
go to step 18.
16
If your network is configured for Authentication and
Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must
ensure that it is configured to match the
Authentication and Encryption settings of your
existing wireless network. Choose the
Authentication Method and Encryption Mode
from the pull-downs in each setting box. Then enter
the Network key and click Next.
Note
• If you want to set more than one WEP key, click Advanced.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.