Brother MFC-820CW - Manual (Page 27)

Configuring your machine for a wireless network
3 - 6
3
15
The machine starts to connect to the wireless device you have selected.
16
If you wireless network is connected successfully, the display shows Connected for 2 seconds and
configuration is completed.
If the connection failed, the display shows Connection Error for 2 seconds. See Wireless network
troubleshooting on page 7-8.
(For MFC-820CW)
1
Press Menu.
2
Press ▲
or
▼
to select LAN.
Press OK.
3
Press ▲
or
▼
to select Setup WLAN.
Press OK.
4
Press ▲
or
▼
to select Setup Wizard.
Press OK.
5
Start to search for a SSID around the machine.
6
After a few seconds, you can select the SSID from the list using ▲ or ▼ . Press OK to select the SSID.
If you select the SSID displayed, go to Step 11.
If you want to add a new SSID, go to Step 7.
7
Select <New SSID> using ▲ or ▼ .
Press OK.
8
Enter a new SSID. For information how to type text, see Entering Text on page B-8.
Press OK.
9
Using ▲ or ▼ , select Infrastructure when instructed.
Press OK.
If you select
Ad-hoc, go to Step 11.
Connecting WLAN
Connected