Atlantis Land IP Security Cam A02-WIPCAM-11B - Manual (Page 10)

IP Security Cam
3
Chapter 4
Physical Description
This section describes the externally visible features of the IP Security Cam.
4.1 Front Panel
Power LED
The Power LED is positioned on the right side of the IP Security Cam’s lens while facing the IP Security Cam.
A steady blue light confirms that the IP Security Cam is powered on.
Link LED
The Link LED is positioned on the right side of the IP Security Cam’s lens while facing the IP Security Cam. It is
located right of the Power LED
A steady orange light confirms that the camera has good connection to LAN connectivity.
Dependent on the data traffic the LED will begin to flash to indicate that the IP Security Cam is receiving/sending
data from/to the network.
Power LED
Link LED