Specification, Appendix e, Video specification – Atlantis Land IP Security Cam A02-WIPCAM-11B User Manual
Page 63: Image (video setting), Hardware interface, Communication support
IP Security Cam
56
Appendix E
Specification
Video specification:
Resolution:
640 x 480 pixel
Sensor:
1/3” color CMOS sensor
Gain control:
Automatic
Exposure:
Automatic
White Balance:
Automatic
Shutter:
Electronics 1/60 ~ 1/15000 sec
Minimum Illumination:
[email protected], 3000K color
Focal Length:
6.0 mm
Aperture:
F=1.8
Focus Extent:
20 cm - ∞
Lens mounting:
Fixed board lens
Image (Video Setting)
Image compression:
JPEG
Frame rate:
20fps@SIF, 6fps@VGA
Compression Rate selection:
Auto
Frame rate setting:
1, 5, 7, 15, 20, auto (depends on the video format)
Video resolution:
320x240, 640x480
Brightness control:
Range 1- 128
Contrast control :
Range 1- 128
Saturation Control:
Yes
Hardware Interface
LAN Connector:
One RJ-45 port to connect to 10/100Mbps Ethernet, auto-sensed
Wireless LAN:
Built-in 802.11b wireless LAN module (Wi-Fi compliant)
LED Indicator:
Power LED (Green)
Link LED (Yellow)
LED three mode setting can be changed by software. (Normal / Off / Dummy)
Power Supply: DC 5V, switching type
Power Communication: 6.5 Watt (1300mA x 5V)
Antenna Connector:
1 connectors
Communication Support
Communication:
10/100Mbps Ethernet and 802.11b wireless LAN.
Encryption:
64 bit, 128 bit or OFF
Communication protocol: HTTP, FTP, TCP/IP, UDP, ARP, ICMP, BOOTP, RARP, DHCP, PPPoE