Atlantis Land IP Security Cam A02-WIPCAM-11B - Manual (Page 16)

IP Security Cam
9
This section describes the Software installation procedure of the IP Security Cam for Web Configuration and
IPView SE application.
8.1 Web Configuration
The IP Security Cam must be configured through its built-in Web-based Configuration.
Extensive knowledge of LAN will be helpful in setting up the IP Security Cam
From the web browser, enter the default IP address to access the Welcome screen of the IP Security Cam. To
configure your IP Security Cam, type http://192.168.0.20 in the address box. The number is the default IP address
of your IP Security Cam. Then, press [Enter]
.
The PC’s IP address must correspond with the IP Security Cam’s IP address in the same
segment for the two devices to communicate.
8.2 Main Menu Image