Atlantis Land IP Security Cam A02-WIPCAM-11B - Manual (Page 29)

IP Security Cam
22
8.3.6 E-mail
The E-mail menu contains the commands for E-mail account, time schedule and manual operation settings.
Click “E-mail” in the system administration menu bar, and the setting screen will appear as below:
Enter the relevant information, such as the SMPT Server Address, Sender e-mail Address, Receiver e-mail
Address, User Name and Password.
Then active sending e-mail by selecting “Enable e-mail Image” in enter “Time schedule” or “Manual Operation”.
• SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail messages between servers you
need to input the mail server address in this field.
• Sender e-mail is the e-mail address of the user who will send the e-mail.
• Receiver e-mail is the e-mail address of the user who will receive the e-mail.
• User Name: Enter the user name in this field.
• Password: Enter the user password in this field to login receiver’s mail server
Time Schedule:
To set schedule to send e-mail. “Interval”: Define time interval between two images sent.
Manual Operation:
When you chick the E-mail image button in view image screen, it will start to e-mail image. “Interval”: To define
time interval between two images sent.
Save/Cancel:
After making sure all settings in the System are correct, click the “Save” button to store the settings for the IP
Security Cam. You can alternatively click the “Cancel” button to restore all settings to the values last saved to or
retrieved from the IP Security Cam.
Click “Home” to
return to Home Screen