Atlantis Land IP Security Cam A02-WIPCAM-11B - Manual (Page 14)

IP Security Cam
7
This section describes the Hardware installation procedure for the IP Security Cam.
6.1 Attach Wireless Antenna
From the rear panel of the IP Security Cam, screw the external Antenna that came
with the IP Security Cam into the antenna connector.
6.2 Connect an Ethernet cable
Connect an Ethernet cable to the network cable connector located on the IP Security
Cam’s rear panel, and then attach it to the network.
6.3 Attach the external power supply
Attach the external power supply to the DC power input connector located on
Wireless IP Security Cam’s rear panel, and then connect it to your local power
supply.
Confirm power source is supplied from the LED indicators
label Power on the IP Security Cam is illuminated.
Chapter 7
Security