Atlantis Land IP Security Cam A02-WIPCAM-11B - Manual (Page 18)

IP Security Cam
11
8.3.1 System Administration
The System menu contains commands for settings that are required for inputting key details to set-up the IP
Security Cam for operation.
Click "System" in the system administration menu bar, and the System screen will appear as illustrated below:
Camera Name:
This field is used to enter a descriptive name for the device.
The default setting for the Camera Name is CS-xxxxxx, where xxxxxx is the last six digit of the MAC Address.
The maximum length is 32 (Printable ASCII).
Location:
This field is used to enter a descriptive name for the location used by the IP Security Cam.
Admin:
Click “Home” to
return to Welcome
Screen