Brother FAX-T94 - Manual (Page 110)

9 - 1 MESSAGE MANAGER
9
This section is for FAX-T96. (If you have FAX-T94, please see
chapter 8 for your remote fax options.)
Message Manager Mode
Message Manager Mode allows you to store incoming fax and voice
messages in a flexible memory. The memory stores 15 minutes of
voice messages, or up to 20 pages of fax messages. The actual
number of pages stored in memory varies depending on the content
and the resolution used. Memory is shared between fax and voice
messages, which are stored on a “first-come, first-served” basis. Any
voice or fax message can be retrieved remotely.
You must record an Outgoing Message in order to use the Message
Manager Mode. (See Recording the Message Manager’s Outgoing
Message (TAD MESSAGE) on page 9-4.)
Setting Up Message Manager
You must set up Message Manager in the following order:
1
Set the Message Store.
2
Record the Message Manager’s Outgoing Message ( TAD
MESSAGE ).
3
Activate Message Manager (TAD) Mode by pressing .
Message Manager
(for FAX-T96 only)