Brother FAX-T94 - Manual (Page 26)

1 - 12 INTRODUCTION
Connections
The external TAD must be connected as shown above.
1
Set your external TAD to one or two rings. (The machine’s Ring
Delay setting does not apply.)
2
Record the outgoing message on your external TAD.
3
Set the TAD to answer calls.
4
Set the Receive Mode to TAD:ANSWER MACH. (For FAX-T94
only). On FAX-T96, set the Receive Mode to TAD:MSG MGR .
(See Choosing the Receive Mode on page 5-1.)
Do not connect a TAD elsewhere on the same phone line
(unless you have the Distinctive Ring service).
TAD
TAD