Brother FAX-T94 - Manual (Page 65)

SETUP RECEIVE 5 - 17
Set the Caller ID to ON
If you have BT Caller ID on your line, then this function should be set
to
ON to display the caller’s phone number on the fax LCD as the
telephone rings.
1
Press Menu/Set , 0 , 2 .
2
Press or to choose ON (or
OFF ).
Press Menu/Set .
3
Press Stop/Exit .
How Does the Caller ID Work?
The Caller ID Appears on the Display When Your
Telephone Rings
As your telephone rings, the screen displays the caller’s phone
number. If the callers name is stored in your machine as a
Speed-Dial, or One-Touch dial, the callers name will be displayed.
Once you pick up the handset, the caller’s ID disappears.
TELEPHONE/FAX will appear on the display.
■
If # UNAVAILABLE appears on the display, it means that the
call came from outside your caller ID service area. *
■
If # WITHHELD appears on the display, it means the caller
intentionally blocked the transmission of his/her ID. *
■
If no caller ID was transmitted to your fax machine, PICK UP
PHONE will remain on the display.
* Depends on network Function.
2.CALLER ID