Brother FAX-T94 - Manual (Page 91)

SETUP SEND 6 - 21
Using TX Lock System
You must use a password to switch TX Lock System ON and OFF.
Setting Up the TX Lock System for the First Time
1
Press Menu/Set , 0 , 1 .
The screen prompts you to enter the
password, and then press
Menu/Set .
2
Enter a 4-digit number as a new password.
3
Press Menu/Set .
The screen prompts you to re-enter
the password.
4
Re-enter the password and press Menu/Set .
5
The screen displays.
6
Press or to choose SET TX
LOCK .
7
Press Menu/Set . The screen
prompts you to enter the password.
8
Enter a 4-digit password, followed
by
Menu/Set .
This is the same as the password of the machine already stored.
The screen displays ACCEPTED for 2 seconds, followed by
TX LOCK MODE - TX Lock System is now switched ON.
If the password you enter at Step 8 is incorrect, the screen
would display
WRONG PASSWORD . After 2 seconds the display
will then return to select menu for Function 0. You must then try
again to switch TX Lock System ON.
NEW PASSWD:----
ENTER & SET
VERIFY:----
ENTER & SET
SET TX LOCK
SET PASSWORD
PASSWORD:----
ENTER & SET