Changing remote codes, To change remote codes, Printing a fax from the memory (for fax-t94 only) – Brother FAX-T94 User Manual
Page 60: Changing remote codes -12, To change remote codes -12, Printing a fax from the memory, For fax-t94 only) -12
5 - 12 SETUP RECEIVE
Changing Remote Codes
Remote Codes might not work with some telephone systems. The
preset Fax Receive Code is
5
1
. The preset Telephone Answer
Code is # 5 1. The preset Activation Voice Code is
8
1
.
To change Remote Codes
1
Press
Menu/Set
,
2
,
4
.
2
Press
or
to select
ON
(or
OFF
), and press
Menu/Set
when the screen displays the setting you want.
3
If you want to, enter a new Fax Receive Code, then press
Menu/Set
.
4
If you want to, enter a new Telephone Answer Code, then press
Menu/Set
.
5
If you want to, enter a new Activation Voice Code, then press
Menu/Set
.
6
Press
Stop/Exit
to exit.
Printing a fax from the memory
(For FAX-T94 only)
If you set Fax Storage to ON for Remote Retrieval, you can still print
a fax from the memory when you are at the fax machine. (See Setting
Fax Storage on page 8-2.)
1
Press
Menu/Set
,
8
,
4
.
2
Press
Fax Start
.
3
After printing has finished.
4
Press
Stop/Exit
.
If you are always disconnected when accessing your external
TAD remotely, try changing the Fax Receive Code from
5
1
to
#
#
#
and the Telephone Answer Code from
#
5
1
to
1
1
1
.
You cannot use the same number for the Fax Receive Code and
the Telephone Answer Code.
4.PRINT DOCUMENT