Brother FAX-T94 - Manual (Page 45)

INITIAL SETUP 4 - 5
Setting the Beeper Volume
You can change the beeper volume. The default (original) setting is
LOW . When the beeper is on, the fax machine beeps every time you
press a key or make a mistake and when a fax is being sent or
received.
1
Press Menu/Set , 1 , 4 .
( LOW , HIGH or OFF )
2
Press or to select your option.
3
When the LCD shows the option you want.
Press Menu/Set .
4
Press Stop/Exit .
Setting the Speaker Volume
You can adjust the speaker volume. You must lift the handset, then
press
Tel (for FAX-T94 only) or Speaker Phone (for FAX-T96
only) before you can adjust the volume. Press or to adjust the
volume level. The display shows the setting you are choosing. Each
key press change the volume to the next setting. To exit, press
Tel
(for FAX-T94 only) or Speaker Phone (for FAX-T96 only). The new
setting will remain until you change it again.
Setting the Ring Volume
You can adjust the ring volume when your machine is idle. You can
select a ring volume level or press until the ring is off.
Press or to adjust the volume level. With each key press, your
machine rings so you can hear the current setting and the screen
displays the setting you are choosing. Each key press changes the
volume to the next setting. The new setting will remain until you
change it again.
4.BEEPER