Brother FAX-T94 - Manual (Page 75)

SETUP SEND 6 - 5
Basic sending operations
Sending faxes using multiple settings
When you send a fax you can choose any combination of these
settings: contrast, resolution, overseas mode, delayed fax timer,
polling transmission or memory transmission. After each setting is
accepted, the LCD will ask if you want to enter more settings:
Press 1 to select more settings. The LCD will return to the SETUP
SEND menu.
—OR—
Press 2 if you have finished choosing settings and go to the next
step.
Contrast
If your document is very light or very dark, you may want to set the
contrast.
Use LIGHT to make the document darker.
Use DARK to make the document lighter.
1
Insert the document face down in
the ADF.
Press Menu/Set , 3 , 3 .
2
Press or to select AUTO , LIGHT or DARK .
Press Menu/Set .
3
Press 1 if you want to choose more
settings and the LCD will return to
the
SETUP SEND menu.
—OR—
Press 2 if you have finished
choosing settings for this page, and then go to Step 4.
4
Enter a fax number.
5
Press Fax Start to send the fax.
3.CONTRAST
ACCEPTED
NEXT
1.YES 2.NO