Requiring a password for operation, P116 – Canon XEED WUX450 User Manual
Customizing System Operation (System Settings)
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
Requiring a Password
> [System settings] > [Other settings] >
Disables the projector unless the
correct password is entered.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
• You cannot set [On] unless you have
completed [Register password].
Once you set a password, the
password entry screen appears at
Enter a 4 digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons.
If the password is valid, the projection
starts. If you enter a wrong password
three times, the power will be turned off.
• The power is also turned off if no password
is input for 3 minutes.
The projector can be used even if no
password is entered.
The projector cannot be used unless
you enter your password.