Ic zoom, P149, In the [inst – Canon XEED WUX450 User Manual
Page 149: Adjusting the size of projected images, Installation-related menu settings
Installation-Related Menu Settings
149
Inst
alla
tio
n
an
d Main
te
nan
ce
Inst
allation
Adjusting the Size of
Projected Images
(WUX400ST/WX450ST)
> [Install settings] >
[Zoom]
Projected images that do not fit on
the screen can be projected at a
digitally reduced size.
Press the [ ] button on the remote
control to project images at a reduced
size, and press the [ ] button to
enlarge images to full size. Images can
be projected at 75-100% of the original
size.
• The factory default is 100%.
HDMI
Component
LAN
Digital PC
Analog PC
USB
D.ZOOM buttons on the remote control
cannot be used for this [Zoom]
function.
• [Zoom] is not available when the
following features are used.
-
Horizontal/vertical keystone
correction (
)
-
Split-screen mode (
• Using [Zoom] after specifying corner
adjustment (
) will clear corner
adjustment settings and apply the
zoom setting. Instead, use [Zoom]
before fine-tuning the image position
with corner adjustment.
• If images still extend off the screen
even after you use [Zoom], you can
use corner adjustment (
tune the position of image corners,
so that images fit on the screen.