Canon PowerShot SX510 HS - Manual (Page 106)

106
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
3 Enter the access point
password.
z z Press the < m> button to access the
keyboard, and then enter the password
( = 103 ).
z z Press the < o><p> buttons or turn the
< 5> dial to choose [Next], and then
press the < m> button.
4 Choose [Auto].
z z Press the < o><p> buttons or turn the
< 5> dial to choose [Auto], and then
press the < m> button.
z z If you selected [ ], [ 2], or [ ] as the
target device, see “Connecting to WPS-
Compatible Access Points”, starting with
step 9 ( = 104 ).
z z If you selected a Web service as the
destination, see “Connecting to WPS-
Compatible Access Points”, starting with
step 11 ( = 105 ).
• To determine the access point password, check on the access point itself or
refer to the user manual.
• Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 2 to manually set an access point. Follow
on-screen instructions and enter an SSID, security settings, and a password.
• When you use an access point that you have already connected to for
connecting to another device, [*] is displayed for the password in step 3. To
use the same password, choose [Next] (either press the < o><p> buttons or
turn the < 5> dial) and press the <m> button.
Connecting without an Access Point
When connecting to a smartphone or printer via Wi-Fi, you can use the
camera as an access point (Camera Access Point mode) instead of using
another access point.
Similarly, no access point is used in camera-to-camera connections
( = 108 ).
1 Access the Wi-Fi menu
( = 101 ).
2 Choose the target device.
z z Choose the target device (either press
the < o><p><q><r> buttons or turn
the < 5> dial), and then press the <m>
button.
z z To connect to a smartphone, choose [ ].
z z To connect to a printer, choose [ 2].
3 Choose [Add a Device].
z z Press the < o><p> buttons or turn the
< 5> dial to choose [Add a Device], and
then press the < m> button.
z z The camera’s SSID is displayed.