Canon PowerShot SX510 HS - Manual (Page 120)

120
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
2 Shoot.
z z To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed ( = 20 ).
z z Choose [Power Saving], and then press
the < m> button.
z z After choosing an item, press the
< q><r> buttons to adjust it as needed.
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
• These power-saving functions are not available when you have set Eco mode
( = 119 ) to [On].
Screen Brightness
Adjust screen brightness as follows.
z z Choose [LCD Brightness], and then
press the < q><r> buttons to adjust the
brightness.
• For maximum brightness, press and hold the < l> button for at least one
second when the shooting screen is displayed or when in single-image display.
(This will override the [LCD Brightness] setting on the [ 3] tab.) To restore the
original brightness, press and hold the < l> button again for at least one
second or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
z z Choose [Start-up Image], and then
choose [Off].