Canon PowerShot SX510 HS - Manual (Page 33)

33
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
• If you prefer to shoot at the zoom factor of the screen in step 1, press the
shutter button all the way down.
• You can adjust the zoom factor that the camera will revert to after Zoom
Framing Assist (when you release the < > button) by moving the zoom lever
as you hold the < > button to resize the white frame.
• To adjust how much the camera zooms out when the < > button is pressed,
press the < n> button and choose one of the three levels in [ Display
Area] on the [ 4] tab.
• The zoom factor cannot be changed with the < > button after you press the
shutter button all the way down in self-timer mode ( = 34 ).
Still Images Movies
Constantly Displaying Faces at the Same Size
When a person’s face is detected, the camera will try to maintain a constant
face size relative to the screen. If the person moves closer, the camera will
automatically zoom out, and vice versa.
Enter Auto mode.
z z Aim the camera at the person’s face.
Press and release the < > button
quickly.
z z After [ Auto: On] is displayed, a frame
[ ] is displayed around the face detected
as the main subject, which the camera will
continue to display at the same size.
z z To adjust the face size relative to the
screen, move the zoom lever. The
camera will track the subject’s face at the
new size.
z z To cancel constant face size display,
press the < > button again. [ Auto:
Off] is displayed.
• Faces may not be displayed at a constant size if the subject’s head
is tilted or facing the camera indirectly.
• Similarly, it may not be possible to maintain a constant face display
size at some zoom factors.
• This feature is not activated even if you press the < > button when
you have disabled [ Auto] (by pressing the < n> button and
choosing [ 4] tab > [ Auto] > [Off] ( = 23 )).
• In Auto mode, some shooting information is not displayed, and
some shooting settings cannot be configured.
• During movie recording, camera operating sounds such as zooming
will be recorded.
• To shoot continuously, access [ W]. Note that continuous shooting is
not available if you choose [ ].
• If the person moves toward the edge of the screen, the camera will zoom out
automatically to keep the person in view.
• You can switch from tracking one face to another when several faces are
detected by pressing the < b> button. [ ] is displayed around the new
subject. However, switching the [ ] frame with the < b> button is not possible
during movie recording.
• The zoom factor will remain the same after you press the shutter button all the
way down in self-timer mode ( = 34 ), even if the relative face size changes.
• [AF Frame] is set to [Face AiAF] and cannot be changed.