Canon PowerShot SX510 HS User Manual
Page 28
28
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Shoot.
z
z
Press the shutter button all the way
down.
z
z
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
z
z
Keep the camera still until the shutter
sound ends.
z
z
After displaying your shot, the camera will
revert to the shooting screen.
z
z
Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
Shooting Movies
Start shooting.
z
z
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time.
z
z
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
z
z
Frames displayed around any detected
faces indicate that they are in focus.
z
z
Once recording begins, take your finger
off the movie button.
Elapsed Time
Resize the subject and
recompose the shot as needed.
z
z
To resize the subject, repeat the
operations in step 3 (
).
However, note that the sound of camera
operations will be recorded, and movies
shot at zoom factors shown in blue will
look grainy.
z
z
When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finish shooting.
z
z
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
z
z
Recording will stop automatically when
the memory card becomes full.
Still Images/Movies
•
If the camera is turned on while the <
l> button is held down,
the camera will no longer sound. To activate sounds again, press
the <
n> button and choose [Mute] on the [3] tab, and then
press the <
q><r> buttons to choose [Off].