Inserting the battery pack and memory card – Canon PowerShot SX510 HS User Manual
Page 12
12
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
3
Remove the battery pack.
z
z
After unplugging the battery charger,
remove the battery pack by pushing it in
( ) and up ( ).
•
To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
•
For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
•
For details on charging time and the number of shots and recording time
possible with a fully charged battery pack, see “Number of Shots/Recording
•
Charged battery packs gradually lose their charge, even when they are not
used. Charge the battery pack on (or immediately before) the day of use.
•
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery pack.
Inserting the Battery Pack and Memory Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
1
Check the card’s write-protect
tab.
z
z
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
2
Open the cover.
z
z
Slide the cover ( ) and open it ( ).
3
Insert the battery pack.
z
z
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
z
z
If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
Terminals
Battery
Lock