Canon PowerShot SX510 HS - Manual (Page 67)

67
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Still Images Movies
Changing the IS Mode Settings
1 Access the setting screen.
z z Press the < n> button, choose [IS
Settings] on the [ 4] tab, and then press
the < m> button ( = 23 ).
2 Configure the setting.
z z Choose [IS Mode], and then choose the
desired option ( = 23 ).
Continuous
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS) ( = 30 ).
Shoot Only* Image stabilization is active only at the moment of shooting.
Off
Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Movies
Shooting Movies with Subjects at the Same Size Shown
before Shooting
Normally, once movie recording begins, a smaller image display area
is shown, with the subject slightly enlarged due to rotational image
stabilization. To shoot subjects at the same size shown before shooting, you
can disable this image stabilization.
z z Follow the steps in “Changing the IS
Mode Settings” ( = 67 ) to access the
[IS Settings] screen.
z z Choose [Dynamic IS], and then choose
[2] ( = 30 ).
• You can also set [IS Mode] to [Off], so that subjects are recorded at
the same size shown before shooting.