Canon PowerShot SX510 HS - Manual (Page 108)

108
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Previous Access Points
You can reconnect to any previous access points automatically by following
step 3 in “Connecting without an Access Point” ( = 106 ).
• To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose [Set
Camera As Access Point].
• When reconnecting via a previous access point, connect the target
device to the access point in step 4.
• To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Connecting to WPS-Compatible Access Points” from step 6
( = 104 ).
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
• Only Canon-brand cameras equipped with a Wi-Fi function can be connected
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot
be connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS
cameras with this camera.
1 Access the Wi-Fi menu
( = 101 ).
2 Choose camera.
z z Press the < o><p><q><r> buttons or
turn the < 5> dial to choose [4], and
then press the < m> button.
3 Choose [Add a Device].
z z Press the < o><p> buttons or turn the
< 5> dial to choose [Add a Device], and
then press the < m> button.
z z Follow steps 1 – 3 on the target camera
too.
z z Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.