Canon VB-C60 - Manual (Page 143)

3-27
Performing Operations and Settings as the Administrator
VB
-C60 Vie
w
er
Setting the Exposure
You can set various options relating to exposure operation.
(1) Exposure Mode
Select [Auto], [Manual], [Auto (Flickerless)] or [Auto (Shutter-priority AE)].
If [Auto] was selected for [Day/Night] under [Camera] on the setting page ( P. 1-19), select
[Auto ], [Auto (Flickerless)] or [Auto (Shutter-priority AE)].
For explanation on each item set in the exposure mode, see the setting page ( P. 1-15).
Note
z Even when the focus mode is changed using Admin Viewer, it is not reflected in the
settings on the setting page.
z Take note that if manual focus is set, the focus will remain fixed.
z When the focus is set using Admin Viewer, the focus mode of other users will also change
to the same mode.
z If a shutter speed of 1/1 to 1/4 is selected in the manual exposure mode ( P. 3-27), the
[Auto] and [One-shot AF] focus modes of camera control are disabled. Switch the focus
mode to [Manual] to bring the subject into focus.
z Refer to the memo in P. 1-17 for the focus range that applies when the Night Mode ( P. 1-
19, P. 3-32) is set.
(2)
(3)
(4)
(1)