Canon VB-C60 - Manual (Page 34)

1-18
Setting the Camera Control and External Device Name (Camera)
Camera Control
(1) [Digital Zoom]
Select [Enable] or [Disable] for digital zoom.
* The higher the digital zoom ratio, the lower the image quality becomes.
(2) [Image Stabilizer]
Select the image stabilizer setting from among the following: [Disable], [On1] and [On2]. The
Image Stabilizer has the effect of correcting blurry images. If you selected [On1] but the
image is still blurry, try using [On2].
If you select [On1] or [On2] as the image stabilizer setting, the viewing angle will be smaller
and the image more coarse than when [Disable] is selected. This is not a malfunction.
Compensable level
of blurriness
Viewing angle ratio Effective pixels
Disable ― 100% Approx. 310,000 pixels
On1 Small 83% Approx. 210,000 pixels
On2 Large 50% Approx. 80,000 pixels
Note
z If you use [On2], it is best to select a received image size smaller than "320 x 240".
z The Image Stabilizer is not effective when the subject is shaking.
z Image Stabilizer does not work against significant vibration exceeding a certain level or
momentary vibration.
z See P. 3-22 for the notes on using the viewer when the Image Stabilizer is set.