Canon VB-C60 User Manual
Page 32
1-16
Setting the Camera Control and External Device Name (Camera)
Note
z Where an outdoor scene is captured from inside a room through a glass window, etc., the
camera may focus on the glass surface if there is dust or water on the glass surface. In this
case, use the camera by installing it at the shortest possible distance (within 30 cm) from
the glass surface.
z The initial camera settings (1) and (2) define the defaults that apply when the camera is
started. Setting changes will be reflected only after the camera is reconnected or camera is
rebooted.
Specify the settings used in the actual operating environment, using Control for Admin in
VB-C60 Viewer. See "Opening Control for Admin" ( P. 3-23).
z If the subject is a traffic signal, electronic scoreboard, etc., the captured image may flicker.
In this case, try changing the [AE Mode] setting to [Auto (Shutter-priority AE)] and selecting
a shutter speed lower than 1/100, to see if the problem improves.