Canon VB-C60 - Manual (Page 178)

5-14
List of Log Messages
B102 Client connection denied [notice]
B103 Client forcibly disconnected [notice]
B301 Audio sending device error [err]
B401 Audio device initialization failed [crit]
Description %1 request denied[%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning
Client connection was denied due to an authentication error (41),
insufficient resource (43), specification of unsupported codec (45),
specification of unsupported stream (46), host access restriction (48), too
many clients (49) or invalid operation mode (4a).
Countermeasure
41: Check the user name, password or user list used for connection, 43:
Reconnect or reboot the camera, 45 or 46: Use supported client software,
48: Check the host access restriction, 49: Check the maximum number of
clients that can be connected, 4a: Check the applicable settings to see if
the audio server is used.
Description %1 access denied[%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 48 | 4a)
Meaning
Connection was initially permitted, but the setting has subsequently been
changed to prohibit access, thereby triggering a forced disconnection (the
denial type is the same with B102).
Description cannot use audio device for tx[%1:%2] (B301)
%1 Error handling (ld | buff)
%2 Error number
Meaning An audio device error was detected.
Countermeasure If the error is not reset automatically, arrange for servicing.
Description audio device initialization error[%1] (B401)
%1 Error number
Meaning The audio device could not be initialized. The audio server stops.
Countermeasure
If the problem persists after rebooting, the camera is faulty. Arrange for
servicing.