Canon VB-C60 - Manual (Page 52)

1-36
Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
(5) [Upload]
Select the upload operation. If [Enable] is selected, upload is performed every time a motion
detection event occurs. To use this function, the [General Upload] sub-menu and [HTTP
Upload] or [FTP Upload] sub-menu must also be set from the [Upload] menu.
(6) [E-mail Notification]
Select the e-mail notification operation to be performed. If [Enable] is selected, e-mail
notification is performed every time a motion detection event occurs. To use this function, the
[E-mail Notification ] sub-menu must also be set from the [Upload] menu.
(7) [Audio Playback at ON Event]
Select the audio playback operation to be performed upon an ON event. If [Enable] is
selected, the sound specified under [Sound Clip] will be played when the mode changes to
[Detected] (ON event).
(8) [Audio Playback at OFF Event]
Select the audio playback operation to be performed upon an OFF event. If [Enable] is
selected, the sound specified under [Sound Clip] will be played when the mode changes to
[Detected] (OFF event).
(9) [Sound Clip]
Select the audio to be played. For registration of sound clips, see "Sound Clip Upload" ( P.
1-39).
(10) [Volume]
Set the sound clip volume as an integer between 1 and 100. The greater the value, the larger
the volume.
(11) [Automatic Tracking at ON Event]
Select the automatic tracking operation. If [Enable] is selected, the camera will automatically
start shaking its head upon entering the [Detected] mode (ON event).
(12) [Maximum Tracking Time (sec.)]
Set the time during which automatic tracking is continued between 1 and 300 seconds.
Note
z The motion detection function cannot be interlocked with external device output. However,
interlocking is possible if the optional recording software RM-64/RM-25/RM-9 is used.
z For the notes on use of motion detection, see "Notes on Use of Motion Detection, Tracking,
Stream for Recording, Image Stabilizer and Bundled Recording Software RM-Lite". ( Start
Guide)