Canon VB-C60 - Manual (Page 39)

1-23
Setting the Image Size, Quality and Frame Rate (Video)
1 1
Det
ai
led Set
tings
MPEG-4
(1) [Video Quality]
Select a desired quality from 1 to 5 (total 5 levels) for video transmitted in MPEG-4.
The greater the value, the higher the quality becomes.
(2) [Video size]
Select [320 x 240] or [640 x 480] for the size of video transmitted.
(3) [Capture Frame Rate]
Select [10], [15] or [30] (fps) as the capture frame rate.
Note
z If a higher video size or quality is set, the data size per frame will increase and the network
load will increase.
JPEG : The frame rate may drop.
MPEG-4 : Video may be temporarily disrupted.
z The data size may increase depending on the type or movement of the subject. If the frame
rate remains low or other undesirable condition continues for a long period, lower the
image size or quality setting.
z Note that if you are using the optional recording software (RM-64/RM-25/RM-9 or bundled
RM-Lite), the amount of hard disk space used will also be affected during recording.