Canon CF-1 - Manual (Page 15)

Safety Information
-15-
WARNING
The instrument must be repaired by a qualified engineer only.
If it is not repaired properly, it may cause fire, electric shock, or accident.
CAUTION For safety reasons, be sure to inspect the instrument before using it.
CAUTION
Always take a test image to check that there is no foreign matter present that
can affect image readings before using the instrument (see page 44).
System Use
WARNING
Do not place multiple portable socket-outlets on the floor. Otherwise, fire or
electric shock may result.
WARNING
Do not connect an additional multiple portable socket-outlet or extension cord
to the system. Otherwise, fire or electric shock may result.
WARNING
Do not connect instruments that are not specified as part of the system.
Otherwise, fire or electric shock may result.
WARNING
For the system, use a power transformer of 1000 VA of the maximum
permitted load. Otherwise, fire or electric shock may result.
WARNING
Use multiple portable socket-outlets only for supplying power to equipment
that is intended to form part of the system. Otherwise, fire or electric shock
may result.
WARNING
Do not connect non-medical electrical equipment that has been supplied as a
part of the system to any power socket other than the multiple socket-outlets
for the system. Otherwise, electric shock may result.
WARNING
Do not connect any electrical equipment that has not been supplied as a part
of the system to the multiple portable socket-outlets for the system.
Otherwise, fire or electric shock may result.
WARNING
Do not simultaneously touch a patient and non-medical electrical equipment.
Otherwise, electric shock may result.
CAUTION
For cleaning equipment forming part of the system, follow the instruction
manual for the equipment. Otherwise, it may cause failure, an accident, or
fire.
CAUTION Install the system in a way that enables the user to achieve optimal use.
Maintenance and Inspection
!
!
!
!
!
!
!
!
!
!
!
!
!
000_L-IE-5152E_CF-1.book Page 15 Monday, July 29, 2013 10:30 AM