Canon CF-1 - Manual (Page 7)

Safety Information
-7-
Guidance and Manufacturer’s Declaration for EMC Directive
Electromagnetic Emissions
The CF-1 is intended for use in the electromagnetic environment specified below.
The user of the CF-1 should assure that it is used in such an environment.
* Not applicable to regions where the rated voltage is less than 220 V.
Emission Test Compliance Electromagnetic Environment – Guidance
RF emissions
CISPR 11
EN 55011
GROUP 1
The CF-1 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electromagnetic
equipment.
RF emissions
CISPR 11
EN 55011
Class A
The CF-1 is suitable for use in all establishments other
than domestic and those directly connected to the public
low-voltage power supply network that supplies buildings
used for domestic purposes. Harmonic emissions
EN IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
EN IEC 61000-3-3*
Complies
000_L-IE-5152E_CF-1.book Page 7 Monday, July 29, 2013 10:30 AM