Optional installation – Water Inc HP-RO-1000 User Manual

Page 9

Advertising
background image

OPTIONAL INSTALLATION

CONNECTING THE HP-RO-1000 TO
REFRIGERATOR ICEMAKER/WATER
DISPENSER

CAUTION

If you are connecting the HP-RO-1000 to your

refrigerator/icemaker with initial system
installation, wait to turn on the icemaker until
the Post- Filter Cartridge (on the right side of the

Step 11.

CAUTION

NOTE: For optimum performance, it is recommended

that the distance between the HP-RO-1000 and the
refrigerator icemaker/water dispenser be no greater
than 10 feet (3 m). At distances greater than 10 feet,
the water pressure from the system may not be
adequate to deliver water to the refrigerator.

Materials Required

(available from Water, Inc.)

3/8" x 3/8" x 3/8" (9.5 x 9.5 x 9.5 mm) compression or

quick-connect tee.

3/8" (9.5 mm) polyethylene tubing (maximum length of

10 feet [3 m] recommended)

Shut-off valve

A. Turn off icemaker and refrigerator water supply. Consult

manufacturer’s guidelines.

B. Close tank valve (on top of storage tank).

C. Turn off water to the system at the cold water supply.

D. Open drinking water faucet to relieve pressure.

E. Locate blue tubing leading to your drinking water faucet.

Cut and insert the 3/8" x 3/8" x 3/8" (9.5 x 9.5 x 9.5 mm)
compression or quick-connect tee into the blue tubing
(Figure 15). Consult manufacturer’s guidelines before
installing the tee connection.

NOTE: When cutting the blue tubing, you may

experience some water leakage.

F. Using a length of 3/8" polyethylene tubing, connect

the icemaker/dispenser line with the free port on the
compression tee.

G. The shut-off valve should be installed as close to this

port of the tee as possible. Shut-off valve should be
installed in the OFF position. Consult manufacturer’s
guidelines before installing the shut-off valve.

H. Completely open cold water supply (until it comes to a

stop).

I. Open tank valve.

J. Turn off the drinking water faucet.

K. Open shut-off valve at the tee connection.

L. Turn on ice maker. Consult manufacturer’s instructions.

M. Check for leaks and tighten connections if necessary.

Tubing to drinking

water faucet

Tubing to

refrigerator

Tubing from

system outlet

Figure 15

HP-RO-1000 Undersink Reverse Osmosis System • 9

Advertising