Auerswald 2206 USB - Manual (Page 11)

Telephoning 11
If the waiting call is an Alarm call, the currently existing call will
be terminated when accepting the waiting Alarm call. How to
accept an alarm call is described on p. 22 .
If you have already a Query call when it knocks, at least one of both calls
has to be finished first.
If you have an analog telephone where you can execute the
„take/refuse a waiting call“ function via T-Net function key/
menu, you will be able to use this comfortable operation, too.
If you have an ISDN telephone or a system telephone the
„take/refuse a waiting call“ function will be executed via an
existing function key or via menu (e.g. with „take call“; see manual of the
telephone).
Internal calls are free of charge.
Internal Call Waiting: If the internally called subscriber is busy you can
generate Call Waiting signals on his telephone by waiting a short time
(if Call Waiting is authorized for his telephone).
If your telephone is set as a Direct Exchange Line Telephone,
you will hear the external dial tone right after picking up the
receiver. Before you dial an internal telephone number, you have to
press the
*
-key twice. Then you hear the internal dial tone. If the tele-
phone has no
*
-key or this key has another function, this function can-
not be executed (pulse dial telephones and some ISDN telephones). On
the system telephones COMfortel 1500/2500 and COMfort 1000/1200/
2000 plus you press the key next to „internal“ instead, on the system tel-
ephone smar-tel-i (only on COMmander Basic) a key under „internal
call“.
You have to dial an Exchange Line Access Number before you dial an
external telephone number. If you make external calls most of the time
and like to do that without dialling the Exchange Line Access Number,
the telephone can be configured as a Direct Exchange Line Telephone
(configuration program COMset).
Short-Code Dial Number: The external telephone numbers that you
often use can be stored under a four digit Short-Code Dial Number to
simplify the dialling. The entry of the telephone numbers is possible via
PC software COMtools (
p. 60 ) or via telephone ( p. 34 ).
To save time in a case of emergency, you can assign the entries in the
emergency Short-Code Dial memory to 2 or 3 digit numbers (10-59;
100-599), e.g. with the number 110 (via configuration software COM-
set). The dialling will happen as usual, the 4-digit Short-Code Dial
Number (8...) will be replaced by the 2- or 3-digit number.
Call without presentation of the calling number: If you like to prevent
that your next calling partner sees your telephone number on his tele-
phone, you will be able to start an external call with the here stated digit
order. If you start an external call as described here, the presentation of
your calling number to your calling partner will be restricted for this call.
If you like to start all the external calls without the telephone number
transmission, you will be able to configure it for your telephone (see
p. 24 ).
If your telephone is configured as a Direct Exchange Line Tel-
ephone, you hear the external dial tone right after picking up the
receiver. In order to call an external connection, you have to dial the
external telephone number without the Exchange Line Access Number
0
. In order to execute the other different call types, you have to dial
each time the
*
-key twice. If your telephone has no
*
-key or if this key
does not have the corresponding function, this function will not be usa-
ble (pulse dial telephones and some of the ISDN telephones). On the
system telephones COMfortel 1500/2500 and COMfort 1000/1200/
2000 plus you press the key next to „internal“ instead, on the system tel-
ephone smar-tel-i (only on COMmander Basic) a key under „internal
call“.
g f (F) 0 g
Refuse waiting caller to continue the current call undisturbed
conversation knocking tone (ignore with pulse dial) back to the current call
☞ T
I
You like to make an internal Call
☞
Call an internal Telephone
b f (**) n g
Dial internal subscriber
telephone number
internal dial tone (for Direct Exchange Line Telephone only) internal number of the telephone conversation
Generate Call Waiting Signals on a busy internal Telephone
f Ǟ f g
Internal Call Waiting
busy tone wait 5 seconds
ringing
tone
conversation
You like to make an external Call (Call via Exchange Line)
☞
Call an external Number
b f (0) f r g
Dial Exchange Line Access Number „0“
and external telephone number
internal
dial tone Exchange Line Access Number
(ignore for Direct Exchange Line Telephone) external
dial tone external
number conversa-
tion