HP XP20000XP24000 Disk Array - Manual (Page 29)

Figure 6 Temporary Files Settings Dialog Box (For JRE 1.6)
Remote Web Console Conventions
General Parameters
• In most Remote Web Console windows, if you change a value, the text color of that value
changes to blue or the icon changes, but the changes are not implemented until you click
Apply. Table 7 on page 30 describes the text colors and font types displayed on the Remote
Web Console windows.
• You can create and store up to 20,000 settings or operations before actually applying them to
the storage system. To avoid a possible error, do not apply more than 20,000 settings at a time.
• The layout of a Remote Web Console window is reset when you click Apply, Cancel, Refresh
( ), or Refresh All ( ) on the File menu, or when you switch tabs.
• When you click Refresh All ( ) on the File menu, the information on the SVP is also updated.
Therefore, the processing caused by Refresh All ( ) on the File menu can take some time.
• If there is a difference between the configuration information displayed on the Remote Web
Console and the actual configuration information that can be recognized from the host, the
configuration information displayed on the Remote Web Console can be updated by clicking
Refresh All (
) on the File menu.
• When the microcode is being updated on the SVP, you must exit and restart all web browsers on
the Remote Web Console.
• If a Remote Web Console user is applying settings, you cannot log in to the Remote Web Console
until after those settings have been applied. A wait of longer than five minutes indicates an
abnormal end, in which case you need to exit and restart the browser.
• When an internal process is being executed on the SVP (for example, a configuration change,
option selection, or an operational information query), Remote Web Console processing might be
temporarily delayed.
• If you request a change to the storage system configuration while another change is being made,
an error message is displayed.
• If the error occurs while you are logging in or clicking Apply to implement changes, wait for a
few minutes, and then retry the operation.
• If the error occurs while you are either switching between Modify mode and View mode or
switching tabs, wait for a few minutes, click Refresh ( ) on the File menu, and then retry
the operation.
• If you remain in Modify mode for a certain period of time without making any changes (the default
is 30 minutes), the storage system releases the Modify mode, and you are returned to View mode.
(You can change the timeout period.) After the Modify mode is released, an error occurs if you
XP24000 Remote Web Console User’s Guide 29