HP XP20000XP24000 Disk Array - Manual (Page 74)

• Capacity: Volume capacity. Open-system volumes are displayed in gigabyte (GB), mainframe
volume are displayed in cylinder (Cyl). For an expanded (LUSE) volume, the capacity of the
each LDEV is displayed.
• RAID: RAID level.
• Internal Volume Information: The hard disk type of internal volume is displayed as follows:
The blank indicates Fibre Channel drive.
A hyphen (-) indicates external volume.
• Parity Group: Parity Group.
• Paths: Number of LU paths.
• Attribute: The attribute set for the volume is displayed as follows:
Pool (X): The volume is set as a pool volume (pool-VOL). X indicates pool ID.
V-VOL: The volume is set as a virtual volume (V-VOL) for XP Snapshot.
TP-VOL: The volume is set as a virtual volume (V-VOL) for XP Thin Provisioning.
Reserved LDEV: The volume is set as a reserved volume of Auto LUN.
JNL Volume: The volume is set as a journal volume.
System Disk: The volume is set as a system disk.
• External Volume Information: Information about the external volume is displayed in the format
Vendor/ Product name/ Serial number/ Hard disk type. The hard disk type is displayed
as follows:
An asterisk (*) indicates BD or SATA drive.
The blank indicates other types of drives.
A hyphen (-) indicates internal volume.
• External Paths: Number of LU paths that are set for the external volume.
• Cache Mode: Cache Mode set for the external volume when it was mapped.
XP Thin Provisioning Window
The information about the XP Thin Provisioning volumes is displayed on the XP Thin Provisioning dialog
box. For detailed information about the displayed items, see the HP StorageWorks XP24000 Thin
Provisioning Software User’s Guide.
Connected Host Window
The information about mainframe hosts is displayed on the Connected Host dialog box.
74 Using the Remote Web Console GUI