HP XP20000XP24000 Disk Array - Manual (Page 84)

Enabling Options Using a License Key File
You can enable multiple options in a single procedure, using a license key file. The license key files are
provided by HP.
To install Remote Web Console options on the Remote Web Console using the license key file:
1. Log in to the Remote Web Console and open the License Key window
(“ License Key Window ” on page 50).
2. Change to Modify mode.
3. From Mode, click File.
The Browse button becomes available.
4. Click Browse to display the dialog box, and select the license key file (the file extension is plk) to
be used for installing options on the displayed window.
The selected file name is displayed in the File Name text box.
Note: The file name must be up to 200 alphanumeric characters (ASCII codes), except for some
symbols, such as ", \, ;, :, ,, *, ?, <, >, |, /. You need to be careful with the license key file name.
5. Click Install.
Note: The time taken for installing depends on the number of license key codes that you install.
For example, if you install 30 key codes, it takes about three minutes. If you install 1000 key
codes, it may take more than 60 minutes.
6. Click Apply (or Cancel).
The status of the enabled options changes to Installed.
Note: If installation fails or an error occurs during the installation, a message dialog box
appears and lists the failed options (see Figure 41 on page 84). To display the error detail in
the dialog box, select the failed option and then click Detail.
Figure 41 Install/Uninstall Error Dialog Box
Enabling Options Automatically
When the licensed capacity exceeds the mounted capacity (or used capacity) because of the reduction
of disk drives, you can automatically enable only the available Remote Web Console options with
permanent keys using the Available button.
Whether the options can be enabled or not using the Available button depends on the relationship
between the mounted capacity of the disk drives and the licensed capacity. The following table shows the
condition of availability of the Available button.
84 Performing Remote Web Console Operations