HP XP20000XP24000 Disk Array - Manual (Page 72)

Figure 33 The LUN Window (Reports Display)
The displayed items on the LUN dialog box are as follows:
• SLPR drop-down list:
You can display the information about a particular SLPR when you select the SLPR from the SLPR
drop-down list. If you have logged on as a storage partition administrator, only information about
the allocated SLPR is displayed, and you cannot select other SLPRs from this drop-down list.
• Port drop-down list:
You can select the port for which information is to be displayed from the drop-down list.
• LUN list:
The following items are displayed in the LUN list:
• SLPR: SLPR number and SLPR name.
• Port Name: Port name.
• Group ID: The group number of the host group.
• LUN: LUNs (logical unit numbers) assigned to logical volumes.
The icon
indicates a logical volume to which an LU path is defined.
The icon
indicates an expanded LU.
The icon
indicates a remote command device.
The icon
indicates a command device.
The icon
indicates command device security.
• LDKC:CU:LDEV: The LDKC number, the CU number, and the LDEV number are displayed.
The icon indicates a normal LDEV.
The icon
indicates an expanded (LUSE) volume.
The icon indicates an LDEV that consists of an expanded (LUSE) volume.
The icon
indicates a reserved volume.
The icon
indicates a variable sized volume (CV).
The icon
indicates that the security is set for the volume.
The icon
indicates a remote command device.
The icon
indicates a command device.
The icon
indicates command device security.
• Emulation: Emulation type. For an expanded (LUSE) volume, the number of the LDEVs that
consist of the LUSE volume is displayed after the emulation type (such as, OPEN-V * 3).
72 Using the Remote Web Console GUI